사용자 정의 크기 알루미늄 디스크 서클

Custom Size Aluminum Disc Circle Overview

Aluminum alloy wafers are products after preliminary processing of aluminum raw materials, which are mixed with manganese-magnesium alloy during processing to enhance all aspects of the alloy’s characteristics. As a semi-finished aluminum alloy, aluminum wafers are loved by many manufacturers of kitchenware, transportation supplies, and machinery. It is the most common semi-finished aluminum alloy raw material for many daily necessities.

Huawei Aluminum is the Chinese factory that provides such aluminum wafers to all over the world.

About Custom Size Aluminum Disk Circle

Aluminum wafer-as the name implies is an aluminum alloy sheet with a certain diameter and thickness. Wafers are often made of aluminum alloy plates after being stretched and cut. 일반적으로 말하면, the things that manufacturers have to do are different, and the requirements for the size of the aluminum wafer-the diameter of the wafer are also different. Our aluminum discs suppliers must also be able to meet the cutting requirements of different sizes, and produce different sizes (aluminum wafer diameters) according to production requirements.

The Detail Of Custom Size Aluminum Disk Circle

Usual format：0.3/0.4/0.5mm,3.5mm;300mm,200mm

Aluminum Plate Circle Features:

Compared with other metals, 알류미늄, which is commonly used in the production of aluminum wafers, has many commendable properties.
1. Low alloy density: 경량, only 1/3 of iron or copper.
2. High strength Aluminum and aluminum alloy have high strength. A certain degree of cold working can strengthen the strength, and some types of aluminum alloys can also be strengthened by heat treatment.
3. Good electrical and thermal conductivity: second only to silver, copper, and gold.
4. Good corrosion resistance: the aluminum surface is easy to naturally produce aluminum oxide protective film, which can well protect the substrate from corrosion. 게다가, good casting performance can be obtained through artificial anodization and coloring.

Aluminum alloy Disc Model

일반적으로 말하면, 우리의 1050 알루미늄 서클, 1060 알루미늄 서클, 1070 알루미늄 서클, 1100 알루미늄 서클, 8011 알루미늄 서클, 3003 aluminum sheet circle, 3105 aluminum circle ect alloy Diameter range is 20mm-1200mm, So these alloys all can do 24″ aluminum round discs.

Aluminim Circle plate Chemical Composition

Aluminum Disks Technical Support

1. Fully-automatic numerical control, no manual contact is required between the unwinding of the coil and the complete blanking of the entire coil, and no adjustment is required. This eliminates the hidden dangers of production safety and product quality caused by ordinary punching.
2. Use coil material to directly produce wafers without slitting and cross-cutting, which reduces costs and damages. The wafers produced are free of oil stains and scratches.
3. Make full use of the width of the roll material and control it with a high-precision servo motor drive system to minimize the distance between the wafer and the edge of the wafer.
4. The production can reach 40-55 pieces per minute, which improves the production efficiency.